Learn More about Techno Glow Paint

Introduction | Next Page > MSDS

Techno Glow Paint is an interior and exterior glow in the dark acrylic paint. It can be used on most clean or treated surfaces such as aluminum, canvas, concrete, composition board, siding, fabric, steel, wood and many others.

Obtain and apply a primer appropriate to your application. A white primer will facilitate the highest glow, while a dark primer will reduce or absorb the luminosity. A primer is not always needed especially if you have a cured dry light colored clean surface.

Apply with a brush or roller. Paint can be thinned with water or an extender if needed and for the use of a spray gun. Clean spills and spatters, hands and tools with soap and warm water. Check out our Clean-Up & Safety products and Brushes. It might safe you a trip to the hardware store. 

Keep the paint lid or cap closed at all times. Our glow in the dark paint is highly concentrated and can dry out fast if not closed in a timely manner. We recommend that you put the original cap back on the bottle for storage. Do not allow the paint to freeze. The twist cap included for sizes up to 8 oz can be washed and stored as well. Our glow in the dark paint will last for many years.

Whether you live in freezing Minnesota or hot Dubai, you can rest assure that the paint will not turn dark or black like so many other expensive glow paints.

As with all other glow paints, it is recommended to apply more then one coat of paint. Additional coats will give a better more solid glow. For the ultimate glow you can apply up to 5 layers of glow paint. We do not see much of an improvement with additional layers. The first couple layers can be dried faster with a hairdryer. There after it is recommended to let it dry naturally. We have tested and compared our paint layer by layer with everything else on the market and we are proud to say that the Techno Glow Paint wins every time.

More Information

Material Safety Data

Product Support

Shop Glow Paint